The fixed method of the outer ring of the bearing is as follows

1 retaining ring fixed to the outer ring of the outer ring with the stopper can be used for this kind of fixed method. The structure is simple and the axial size is small. Can not suffer greater axial load.

The 2 circlips fixed simple structure, small axial size, inconvenient assembly. In between the bearing end and the ring and dispensing ring, can also adjust the axial position of the bearing, make up the error processing and disassembly. The utility at the place where the speed is not high and the axial load is not big.

3 end cap is fixed to the central and radial thrust bearing at the end of the shaft. The end cap can be made into various forms. When the end cover is a through hole, but also can be provided with various sealing installation. Used in high speed, large axial load place.

4 screw thread ring fixed to the high speed, large axial load place. Thread ring fixed can also conditioning the centripetal thrust bearing face bearing clearance surface arrangement. But there should be a way to prevent screw thread.

5 the fixing of the adjusting screw and the adjusting cover is similar to the end cover fixing. This installation for conditioning bearing clearance outside the box. Adjustment screw should be anti loose approach.